5 importance of electricity

B. the specific heat of water

A multicellular organism is an organism that consists of many cells. The term "multi" is technically used to refer to something that is more than one, so "multicellular" means more than one.

Multicellular organisms evolve through cell specialization and division of labour. Cells become efficient at one process and depend on other cells to carry out different processes. All the cells work in coordination to ensure the proper functioning of the body.

To learn more about the multicellular organism, visit;

https://brainly.com/question/941766

#SPJ13

Answer:

It is alkyne

Explanation:

Hydra, a type of cnidarian, have equal survival rates through life because they are equally fit at all stages. Hydra are an example of an organism with a type I survivorship curve. Thus, the correct option is b. II.

Differences between how energy moves through an ecosystem compared to how chemicals move through the ecosystem. The fundamental difference between how energy moves through an ecosystem compared to how chemicals move through the ecosystem is that energy can not be recycled. Energy is obtained from the sun and is stored in organic molecules, and it flows through an ecosystem through metabolic processes. However, the number of chemicals like carbon, oxygen, nitrogen, water, and phosphorus remains constant in an ecosystem.

Tropical rainforest soils are usually nutrient-poor and low in organic matter. Therefore, option c. nutrient-poor and low in organic matter is the correct answer. The soil in the tropical rainforest is nutrient-poor because heavy rainfall washes away the nutrients, and the soil contains a high level of aluminum and iron, which are toxic to plants. Due to these reasons, there is slow decomposition of organic matter that makes the soil low in organic matter.

Thus, the correct option is b.

To learn more about  ecosystem check the link below-

https://brainly.com/question/842527

#SPJ11

Answer:

b

Explanation:

glucose

During cellular respiration, a glucose molecule is gradually broken down into carbon dioxide and water. Along the way, some ATP is produced directly in the reactions that transform glucose. Much more ATP, however, is produced later in a process called oxidative phosphorylation. Oxidative phosphorylation is powered by the movement of electrons through the electron transport chain, a series of proteins embedded in the inner membrane of the mitochondrion.

Answer:

During cellular respiration, your cells release energy in the form of ATP (adenosine triphosphate), which is used as an energy source by the body. The energy released during cellular respiration comes from the breakdown of glucose, which is a type of sugar that is used by the body as a source of fuel. In addition to ATP, some heat is also released during cellular respiration, but this is not the primary product of the process. So the correct answer is a. Energy.

To determine how many moles of oxygen can be produced from 25 grams of potassium chlorate, we first need to calculate the number of moles of potassium chlorate in 25 grams.

The molar mass of potassium chlorate (KClO3) is 122.55 g/mol. Therefore, the number of moles of KClO3 in 25 grams is:

25 g / 122.55 g/mol = 0.204 moles of KClO3

Next, we can use the stoichiometry of the chemical equation to determine the number of moles of oxygen produced. According to the balanced equation, for every 1 mole of KClO3, 3 moles of oxygen are produced. Therefore, the number of moles of oxygen produced from 0.204 moles of KClO3 is:

0.204 moles KClO3 x 3 moles O2 / 1 mole KClO3 = 0.612 moles O2

Therefore, 25 grams of potassium chlorate can produce 0.612 moles of oxygen.

The mineral presented in the image has a metallic luster. It is opaque, which means that it is not clear and light does not pass through it. It also has cleavage, which refers to the tendency of a mineral to break along planes of weakness.

The cleavage is evident in the image, as the mineral appears to have flat, smooth surfaces that intersect at sharp angles when it is broken or fractured.Cleavage is one of the most important properties of a mineral because it provides information about the way in which the mineral will break when subjected to external forces.

A mineral with good cleavage will break into pieces that have a smooth, flat surface, while a mineral with poor cleavage will break into pieces that have an uneven surface. This property is often used by mineralogists to help identify minerals since it is unique to each mineral.

To learn more about metallic luster, visit:

https://brainly.com/question/1828077

#SPJ11

The mineral’s luster, opacity, and cleavage define its properties. Metallic luster means it reflects light like metal, opacity implies no light passes through it, and cleavage speaks to how it breaks.

In order to determine the characteristics of a mineral, we assess attributes such as the mineral's luster, opacity, and cleavage. The metallic luster refers to how light interacts with the surface of a mineral, metallic luster means the mineral reflects light as a polished metal would.

When a mineral is opaque, it means that light does not pass through it at all - it is not transparent or translucent. Lastly, a mineral's cleavage refers to how it breaks or fractures along distinctive planes. To accurately describe the mineral in the image, these three characteristics would need to be observable.

https://brainly.com/question/33199487

#SPJ12

When 45 g of sodium chloride is dissolved in 350 ml of water, the percentage mass by volume will be 12.9%. Correct option will be option 3.

Concentration of solution is usually expressed as % m/v when the amount of solute and volume of solution are given. It means the percentage of amount of substance in the given volume of the solution. Here the solution is made by mixing 45.0 g of sodium chloride in 350 ml of water.

So,  Ratio = mass/ volume = mass of solute/ volume of solution

                              = 45 / 350 = 0.129

Percentage m/v = 0.129 × 100 = 12.9 %

So here the % m/v will be 12.9%. Option 3 is the right answer.

For more information regarding concentration of solution, kindly refer

https://brainly.com/question/19863389

#SPJ4

The lower boiling point of propane  makes it better in winter compared to butane.

The term LPG stands for liquified petroleum gases. It is one of the kinds of the gases that we can be able to use as fuel. We have to know that the gases that are used as fuel are the gases that are able to burn very well as this is key in the use of the fuel.

In the winter, we would need to use a gas that has a much lower boiling point and this is why in this case, the propane would be found to be better than butane due to its lower boiling point.

Learn more about LPG:https://brainly.com/question/22425958

#SPJ1

The stereochemistries of the two alkenes can be determined by identifying the alkenes, locating the double bond, identifying the attached groups, ranking their priorities, and comparing the orientation of the high-priority groups. The stereochemistries will be either Z or E based on the orientation of the high-priority groups.

To determine the stereochemistries of the two alkenes, follow these steps:

1. Identify the two alkenes in the given molecule or structure.
2. Locate the double bond in each alkene, as the stereochemistry is determined by the arrangement of groups around the double bond.
3. Identify the two groups attached to each carbon atom in the double bond.
4. Compare the priority of the groups on each carbon using the Cahn-Ingold-Prelog (CIP) priority rules, which rank groups based on their atomic number, with higher atomic numbers having higher priority.
5. Determine the stereochemistry of the alkenes by comparing the orientation of the high-priority groups on each carbon of the double bond.

If the high-priority groups are on the same side of the double bond, the stereochemistry is called "Z" (from the German word "zusammen," meaning "together"). If the high-priority groups are on opposite sides of the double bond, the stereochemistry is called "E" (from the German word "entgegen," meaning "opposite").

You can learn more about alkenes at: brainly.com/question/31033378

#SPJ11

The type of irony used in "reckless endangerment of human life" is verbal irony. Verbal irony is a figure of speech in which words are used to mean something different from their literal meaning.

In this instance, the phrase "reckless endangerment of human life" refers to behavior that puts people's lives in danger. However, it is ironic because it is a criminal offense that should be avoided and yet it is taking place. Verbal irony is often used for humorous or dramatic effect. This type of irony is used to create a contrast between what is said and what is meant. In this case, the phrase "reckless endangerment of human life" is used to describe behavior that is extremely dangerous, yet it is ironic because it is the opposite of what should be happening.

To learn more about Verbal irony check the link below-

https://brainly.com/question/1551288

#SPJ11

Waves are rhythmic disturbances that carry energy through matter or space without transferring matter,

Waves are disturbance that occur in a medium that tranfers energy as it is being propageated but wihout a pearmament displacement of the partcle of the medium.

There are two main types of waves, namely:

Mechanical waves - these are waves that require a materila medium for their propagation. For example, soud waves and water waves.

Electromagnetic waves - these are waved that  do not require a metarial medium for their propagetion. For example, light waves and radio waves.

Learn more about waves at: https://brainly.com/question/26116832

#SPJ1

Answer:

0.106 moles

Explanation:

To solve this problem we will need to use Avogadro's number, it is the number of molecules (or atoms) in one mol.

We convert molecules into moles using that number:

6.38x10²² molecules ÷ 6.023x10²³ molecules/mol = 0.106 moles

There are 0.106 moles in 6.38x10²² molecules of CO₂.

The factor that make the climates different at Missoula, MT and Cape Elizabeth, ME is C. altitude and proximity to large bodies of water.

Missoula, MT is located in a high-altitude region and is far from large bodies of water, which results in a continental climate with cold winters and hot summers.

Cape Elizabeth, ME is located at a lower altitude and is near the Atlantic Ocean, which results in a maritime climate with mild winters and cool summers.

In conclusion, one of the factors that endures that the climates in Missoula and Cape Elizabeth, is the altitude as well as how close they are to oceans.

Find out more on climate difference at https://brainly.com/question/18120343

#SPJ1

Answer:

the answer would be d. usually dull in appearance

Explanation:

because brittle bendable and poor conductor of heat and electricity are all for the non-metals

Answer:

C !!

Explanation:

hope this helps! usually people classify metals based on if they can conduct heat or electricity

"In a process where 50% acetic acid solution could accidentally come in contact with ethylene glycol, hazards that should be given carful consideration including the possibility of polymerization, heat generation and pressure build-up". The given statement is true.

The reaction of an alcohol (ethylene glycol) with an acid (acetic acid) in the presence of conc. H₂SO₄ to form an ester is called an esterification reaction. Ethyl acetate is formed from the reaction of Ethyl alcohol and Acetic acid in the presence of conc. H₂SO₄.

This process can be hazardous if safety measures are not taken as a lot of heat is generated throughout the process and there is a possibility of polymerization.

Lear more about esterification reaction from the link given below.

https://brainly.com/question/16010744

#SPJ4

The coefficient that would go in front of H2 is 2.

The chemical equation that represents the reaction between Pb and RbOH to form Rb2PbO2 and H2 is:

Pb + 2RbOH → Rb2PbO2 + H2

In the equation, the coefficients of Pb, RbOH, Rb2PbO2, and H2 are 1, 2, 1, and an unknown coefficient x, respectively.

To balance the equation, we first write the skeleton equation.

Pb + RbOH → Rb2PbO2 + H2

The reaction has one Pb, one Rb, one O, and one H on both the reactant and product side.

However, the reaction has two OH on the reactant side and two O on the product side.

To balance these atoms, we place a coefficient of 2 in front of the RbOH on the reactant side and a coefficient of 2 in front of the H2 on the product side.

This gives:

Pb + 2RbOH → Rb2PbO2 + 2H2

Therefore, the coefficient that would go in front of H2 is 2.

Learn more about coefficient from this link:

https://brainly.com/question/1038771

#SPJ11

The enzyme that catalyzes the synthesis of ATP as hydrogen ions flow down their concentration gradient is called ATP synthase.

In the inner mitochondriаl membrаne, hydrogen ions hаve just one chаnnel аvаilаble: а membrаne-spаnning protein known аs АTP synthаse. Conceptuаlly, АTP synthаse is а lot like а turbine in а hydroelectric power plаnt. Insteаd of being turned by wаter, it’s turned by the flow of hydrogen ions moving down their electrochemicаl grаdient. Аs АTP synthаse turns, it cаtаlyzes the аddition of а phosphаte to АDP, cаpturing energy from the proton grаdient аs АTP.

For more information about ATP synthase refer to the link:

https://brainly.com/question/12454295

#SPJ4

Answer: If we observe a low-mass helium white dwarf then we can conclude that low mass helium composed of mainly helium which is a relatively cool white dwarf having high density which will cool and fade over the time and having stellar remnant.

Explanation:

It is a stellar remnant: The fact that you are observing a white dwarf indicates that it is the remnant of a star that has completed its main sequence evolution.

It has exhausted nuclear fusion: White dwarfs are no longer capable of generating energy through nuclear fusion.

It is composed mainly of helium: The term "helium white dwarf" suggests that the star's core is predominantly composed of helium

It is a relatively cool white dwarf: The mass of the white dwarf affects its temperature and luminosity.

It has a high density: White dwarfs are incredibly dense objects.

It will cool and fade over time:  As they cool, their luminosity decreases, and they become fainter and more difficult to observe.

Answer:

Diffusion is the movement of particles from an area of high concentration to an area of low concentration.

Explanation:

Answer:

Explanation:

The density of a substance can be found by using the formula

\(density = \frac{mass}{volume} \\ \)

From the question we have

\(density = \frac{20}{25} = \frac{4}{5} \\ \)

We have the final answer as

Hope this helps you

The oil that provides the most monounsaturated fatty acids is olive oil. Monounsaturated fatty acids are a type of healthy fat that can help lower cholesterol levels and reduce the risk of heart disease. Olive oil is particularly rich in these fatty acids, making it a great choice for cooking and dressing salads.

While fish oil, coconut oil, flaxseed oil, and corn oil all contain some monounsaturated fatty acids, they are not as high in this type of fat as olive oil. Fish oil is a good source of omega-3 fatty acids, while coconut oil is high in saturated fat. Flaxseed oil is a good source of both omega-3 and omega-6 fatty acids, and corn oil is a good source of polyunsaturated fatty acids.

know more about fatty acids here

https://brainly.com/question/30712004#

#SPJ11

The carbon skeletons of amino acids can be converted into seven key molecules. These seven molecules play crucial roles in metabolism, energy production, biosynthesis of other essential compounds.

1. Pyruvate: This is generated from alanine, cysteine, glycine, serine, and threonine.
2. Acetyl-CoA: Derived from isoleucine, leucine, and tryptophan, it is an important molecule involved in energy production and synthesis of other compounds.
3. Acetoacetyl-CoA: Ketogenic amino acids like leucine and lysine produce this molecule, which can be used for ketone body synthesis or further converted to acetyl-CoA.
4. Alpha-ketoglutarate: Aspartate and glutamate yield this intermediate, which is involved in the citric acid cycle.
5. Succinyl-CoA: This molecule, produced from methionine, threonine, isoleucine, and valine, is another citric acid cycle intermediate.
6. Fumarate: Phenylalanine, tyrosine, and aspartate generate fumarate, which is converted to malate in the citric acid cycle.
7. Oxaloacetate: Asparagine and aspartate produce this molecule, which is essential for gluconeogenesis and the citric acid cycle.

Learn more about  carbon skeletons of amino acids here

https://brainly.com/question/31815638

#SPJ11

The volume, in l, of 10.0 m hcl needed to make 2.00 l of 2.00 m hcl solution by dilution with water is 0.400 L. The correct answer is option b (0.400 L).

To make a 2.00 M HCl solution by diluting 10.0 M HCl, we can use the formula:

M1V1 = M2V2 ,where M1 is the initial concentration (10.0 M), V1 is the initial volume (unknown), M2 is the final concentration (2.00 M), and V2 is the final volume (2.00 L).

Rearranging this equation to solve for V1, we get:

V1 = (M2V2) / M1

Plugging in the values, we get:

V1 = (2.00 M x 2.00 L) / 10.0 M

V1 = 0.400 L

Therefore, the volume of 10.0 M HCl needed to make 2.00 L of 2.00 M HCl solution by dilution with water is 0.400 L.

Dilution is defined as the process of adding more solvent to a solution. When diluting a solution, the concentration of the solute is reduced. It's important to note that when diluting a solution, the number of moles of the solute remains the same.

For more question on  dilution

https://brainly.com/question/27097060

#SPJ11

The process of effusion is when a gas escapes from a container through a tiny hole and enters a vacuum. The rate of effusion of a gas is inversely related to the square root of its molar mass, according to Graham's law of effusion.

Lighter gases effuse more quickly than heavier gases, according to this.

The molar masses of chlorine (Cl2) and fluorine (F2) are 38.00 g/mol and 70.90 g/mol, respectively. Fluorine should thus emit more quickly than chlorine since it is lighter.

Using Graham's rule, the effusion rate ratio of two gases may be mathematically expressed as follows:

Rate of gas effusion 1 / Rate of gas effusion 2 = (Molar mass of gas) squared Molar mass is two.

learn more about process of effusion here:

https://brainly.com/question/4593952

#SPJ11

Answer:

It  equals to the number of electrons in that atom, which is in turn equal to its atomic number

Explanation:

Explanation:

it turn into chemical energy

Answer:

Ca(NO3)2

           .................

Ca(NO3)2 is a possible compound formed from Ca²+ and NO3-¹.

Learn more at: https://brainly.com/question/11148793?referrer=searchResults