Suspensions are a homogeneous mix True False
Answers
Answer:
FALSE
Explanation:
Suspensions are heterogeneous mixtures from which some of the particles settle with time.
Answer:
False
Explanation:
Suspensions are not a homogeneous mix as the particles do not dissolve into the liquid as they are solids.
to give you an idea the definition of homogeneous is 'denoting a process involving substances in the same phase (solid, liquid, or gaseous).' and since suspension is a solid within a liquid it is not homogeneous
Related Questions
what is the best wavelength to observe a solar prominence or flare as seen on the limb of the sun here?
Answers
The best wavelength to observe a solar prominence or flare IS 656 nm, a red hydrogen emission line (called the "H-α" line).
What is a solar flare?
A solar flare is a brief eruption of solar electromagnetic energy that alters the acceleration and heat of gas in the sun's atmosphere. Solar flares can endure for a short while or for several hours. Solar flares typically occur in the sun's active regions, where several sunspot groupings can be seen.
Sunspots and solar flares differ from one another in that sunspots are darker regions of the sun's surface. Because of the region's high level of magnetic activity, results in colder temperatures. Strong magnetic fields can collide in these regions, where sunspots and solar flares occur, and release a lot of energy.
For more questions like Solar flares click the link below:
https://brainly.com/question/12120527
#SPJ4
What nuclear reaction is shown in the equation below?
A. Nuclear fusion
B. Nuclear fission
C. Positron emission
D. Beta decay
Answers
The carbon isotope was cobined with the proton to produce the nitrogen isotope hence it is a fusion reaction.
What is a nuclear fusion?The term nuclear fusion refers to a kind of reaction in which two nuclei fuse together to give rise to a single nuclei with the evolution of energy.
We can see that the carbon isotope was cobined with the proton to produce the nitrogen isotope hence it is a fusion reaction.
Learn more about nuclear fusion:https://brainly.com/question/12701636
#SPJ2
Answer:
A. Nuclear fusion
Explanation:
got it right, trust
Which measurement tool is used to find the volume of a small piece of granite? Select one: a. thermometer b. metric ruler c. graduated cylinder d. triple beam balance
Answers
Answer:
Explanation:
c. graduated cylinder
1. In 10 seconds, a car accelerates 4 m/s/s to 60 m/s. How fast was the car going before it accelerated?
Answers
A car is sitting still what could cause the car to move
Answers
Wheels Accelerated by Hanging Weight Lab
• Lab Objective: Using Newton's Second Law for rotation to experimentally determine the rotational inertia of bicycle wheels.
• We can derive the rotational inertia of uniform objects using the definition of rotational inertia: For non-uniform shapes such as bicycle wheels, this method is difficult. In the videos provided, different bicycle wheels are accelerated by a weight suspended from a string wrapped around the rim of the wheel. How can we use these videos (and interactable tools included) to experimentally determine the rotational inertia of these bike wheels?
Answers
All answers are given below.
What do you mean by inertia?Inertia is the tendency of an object to remain in its state of motion, whether it be at rest or in uniform motion in a straight line, unless acted upon by an external force. It is a fundamental concept in classical physics, described by Isaac Newton's first law of motion, and is related to an object's mass. The greater an object's mass, the greater its inertia, making it harder to change its motion.
The rotational inertia of the bicycle wheel can be experimentally determined by using Newton's Second Law for rotation. The Second Law states that the net torque acting on an object is equal to the rate of change of its angular momentum, or:
Στ = Iα
where Στ is the net torque, I is the rotational inertia of the object, and α is the angular acceleration.
In the case of the bicycle wheel, the hanging weight provides the net torque, and the rotational inertia can be determined by measuring the angular acceleration of the wheel. To do this, you can use the following steps:
Measure the mass of the hanging weight and the radius of the wheel.
Suspend the weight from a string wrapped around the rim of the wheel.
Measure the angular acceleration of the wheel by using an angular velocity sensor or by measuring the time it takes for the wheel to complete a certain number of revolutions.
Substitute the measured values into the equation: Στ = Iα and solve for the rotational inertia I.
Repeat the experiment with different weights and/or different radii to determine the relationship between the rotational inertia and the mass and radius of the wheel.
Using the videos and interactable tools provided, you can visualize and experiment with different scenarios to determine the rotational inertia of the bicycle wheel. This method allows you to experimentally validate the relationship between rotational inertia, mass, and radius, and to gain a deeper understanding of the physics of rotational motion.
To know more about force visit:
https://brainly.com/question/28875770
#SPJ4
A 5,000 kg truck moving at 8 m/s has the same momentum as a 2,500 kg car. What is the velocity of
the car?
Answers
Answer:
16m/s
Explanation:
Mv=mv
5000x8=2500x v
V=5000x8/2500
V=40000/2500
= 16m/s
does the magnetic field increase or decrease the wavelength? disregard the effect of electron spin.
Answers
The presence of a magnetic field does not directly alter the wavelength of electromagnetic radiation. However, magnetic fields can indirectly affect the behavior of charged particles, which can lead to changes in the emitted or absorbed wavelengths of light.
The wavelength of electromagnetic radiation is primarily determined by the frequency of the wave and the speed of light in a vacuum, which are intrinsic properties of the wave itself. The magnetic field, on its own, does not have a direct effect on these fundamental properties. Therefore, in the absence of any other factors, the presence of a magnetic field does not increase or decrease the wavelength of electromagnetic radiation.
However, the behavior of charged particles in the presence of a magnetic field can be influenced, which can indirectly impact the wavelength of light emitted or absorbed by those particles. For example, when charged particles move in a circular path under the influence of a magnetic field, such as in a cyclotron, they emit radiation known as cyclotron radiation. This radiation is characterized by a specific wavelength determined by the properties of the particles and the strength of the magnetic field.
In addition, magnetic fields can cause a phenomenon called Zeeman splitting, which occurs when the energy levels of atoms or molecules are affected by the magnetic field. This splitting results in the emission or absorption of light at slightly different wavelengths, known as the Zeeman effect. This effect can be observed in certain situations, such as in the spectra of stars or in laboratory experiments involving magnetic fields.
In summary, while the magnetic field itself does not directly impact the wavelength of electromagnetic radiation, it can affect the behavior of charged particles and subsequently lead to changes in the emitted or absorbed wavelengths of light.
To learn more about magnetic Click Here: brainly.com/question/3617233
#SPJ11
Provide two examples of how health care workers can demonstrate their commitment to quality control through their personal appearance.
Answers
Attitude:
Our job is to serve our customers and provide high quality service with care and courtesy.
Always thank customers for choosing our organization.
Exceed expectations.
Acknowledge a customer’s presence immediately. Smile and introduce yourself at once.
Attitude takes into account three things: our body language, our friendliness and our willingness to connect with our customers.
The body language that goes along with the words that we are speaking greatly influences how we are understood. In fact, experts tell us that how we speak is just as important as what we are saying! Our customers are our reason for being in the healthcare environment; our attitude should always be one of concern, respect and genuine caring.
As a customer yourself, do you remember those places of business where the staff was friendly and went out of its way to acknowledge you? Of course you do, since this was an environment where you felt welcomed. We exhibit friendliness by smiling warmly, introducing ourselves immediately, and never, ever ignoring someone. All our customers are equally deserving of attention.
Finally, we show the right attitude by meeting the needs of our customers or finding someone who can. We go out of our way to be helpful; for example, we don’t point the way – we accompany the customer to where they need to go. In addition, we always thank them for choosing us to provide their healthcare experience.
An attitude of service excellence is further exhibited by showing interest when a customer speaks to us. Each one, without exception, should be treated as if he or she is the most important person in our facility; and rudeness is never acceptable. We are attentive to the customer’s immediate need, or gladly take the individual to someone better equipped to provide the service. We always apologize for problems and inconveniences, and enthusiastically carry out service recovery.
Lastly, we recognize that our customers have a sense of urgency and show them that we value their time. Customers are not an interruption of our work; they are our focal point, and caring for them with an attitude that shows we value them should be our daily goal.
Appearance:
Be clean and professional.
Follow dress code policies and wear your identification badge correctly at all times.
Pick up litter and dispose of it properly.
Clean up spills and return equipment to its proper place.
How long does it take to make a first impression on a customer? Just seven seconds, according to popular research. How our customers perceive us in that brief time is very important because it sets the stage for their entire healthcare experience. A first impression is sometimes referred to a “moment of truth” because customers believe that what they are hearing, seeing or feeling is reality – that is, the truth of the situation. No matter that their first impression is merely a snapshot of less than one moment in time. It is perceived as genuine: who we are, the quality of service that we deliver, or our physical environment of care. Needless to say, making that first impression a good one is crucial.
Moments of truth are directly impacted by the appearance of staff as well as that of the workplace, both of which are a direct representation of our organization. When we dress appropriately for the job and wear our name badges so that they are easily readable, we project professionalism to our customers. We not only create a good first impression, but we also reinforce our culture of quality through attention to personal appearance. The same principle applies to our healthcare setting. When we take pains to keep our workspace uncluttered and to pick up trash in hallways and public areas, we are sending a positive message to those who enter the doors of our facility for the first time. We should always take pride in how we present ourselves and in the facility itself. Doing so conveys respect for customers and their expectations.
Andy has two samples of liquids. Sample A has a pH of 4, and sample B has a pH of 6. What can Andy conclude about these two samples?
Sample A is
, and sample B is
Answers
Sample b is very weak acid , almost neutral ex. Milk.
like the alto in a choir the octavina plays the lower melody . what musical element does this tell?
A.melody
B.dynamics
C.rhythm
D.timbre
Answers
Like the alto in a choir the octavina plays the lower melody . what musical element does this tell?
answer : melody....
Q3The pressure P (in kilopascals), volume V (in liters) and temperature T(in kelvins) of a mole of an ideal gas are related by the equation PV = 8.31T Find the rate at which the pressure is changing when the temperature is 300 K and increasing at a rate of 0.1 K/s and the volume is 100 L and increasing at a rate of 0.2L/s.
Answers
dP/dt = (0.831 - 0.2P) / 100, where P represents pressure (in kilopascals).
This equation represents the rate at which the pressure is changing with the given conditions of temperature and volume.
To find the rate at which the pressure is changing, we need to use partial derivatives. Given the equation PV = 8.31T, we can differentiate both sides of the equation with respect to time t.
Differentiating both sides with respect to time t, we get:
P(dV/dt) + V(dP/dt) = 8.31(dT/dt)
Now, let's substitute the given values:
dT/dt = 0.1 K/s (rate of temperature change)
dV/dt = 0.2 L/s (rate of volume change)
T = 300 K (temperature)
V = 100 L (volume)
Plugging in the values into the equation:
P(0.2) + 100(dP/dt) = 8.31(0.1)
0.2P + 100(dP/dt) = 0.831
Now, we can solve for dP/dt:
100(dP/dt) = 0.831 - 0.2P
dP/dt = (0.831 - 0.2P) / 100
Therefore, the rate at which the pressure is changing when the temperature is 300 K and increasing at a rate of 0.1 K/s, and the volume is 100 L and increasing at a rate of 0.2 L/s is given by:
dP/dt = (0.831 - 0.2P) / 100
Read more about Ideal Gas here: https://brainly.com/question/25290815
#SPJ11
A parcel of air at the surface has an air temperature of 17°C. Print out the blank stuve diagram below, and draw both dry and moist adiabats between the surface and 500mb (like I did above). 1 point What would the temperature of the parcel be at 500mb if cooled dry adiabatically? O -25°C -35°C -45°C 1 point What would the temperature of the parcel be at 500mb if cooled moist adiabatically? -15°C -25°C 0 -35°C
Answers
If an air parcel cools adiabatically at the surface with a temperature of 17 °C, the temperature drops by about 10 °C for every 1000 meters of altitude. 500mb is typically about 5500 meters from the surface, so with dry adiabatic cooling the package temperature will be about 17°C - (10°C * 5.5) = -33°C.
On the other hand, if the air parcel is moist and adiabatically cooled, the temperature change will be slower because latent heat is released when the water vapor condenses. The adiabatic temperature drop rate when wet is typically about 6°C per 1000 meters.
However, it is generally cooler than the dry adiabatic decay rate, so for wet adiabatic cooling, the -15°C, -25°C, 0, and -35°C options are possible temperatures for a 500MB package. There is a possibility. .
To learn more about adiabatic:
https://brainly.com/question/14926413
#SPJ4
Answer the following questions 1 What is the difference between mass and weight of an object. Will the mass and weight of an object on the earth be same as their values on Mars ? Why?
Answers
Answer:
difference between mass and weight is that mass is amount of matter in a material while weight is a measure of how the force of gravity acts upon that mass.the mass of an object will be same on earth and mars but its weight on both planets will be different.
a bicycle pedal is pushed straight downwards by a foot with a 37 newton force. the shaft of the pedal is 20 cm long. if the shaft is radians past horizontal, what is the magnitude of the torque about the point where the shaft is attached to the bicycle?
Answers
The magnitude of the torque about the point where the shaft is attached to the bicycle will be 740 N-m.
What is torque?The torque is the cross product of the perpendicular distance and force. The torque is the vector quantity and its SI unit is N-m. The torque is given as,
T = r x F
T = r · F · sin θ
A bicycle pedal is pushed straight downwards by a foot with 37 Newtons of force. The shaft of the pedal is 20 cm long. If the shaft is radians past horizontal. Then the angle will become the right angle.
Then the magnitude of the torque about the point where the shaft is attached to the bicycle will be given as,
T = r · F · sin θ
T = 20 · 37 · sin 90°
T = 740 N-m
Then the magnitude of the torque about the point where the shaft is attached to the bicycle will be 740 N-m.
More about the torque link is given below.
https://brainly.com/question/28220969
#SPJ4
When charging objects by induction which of the following must be true
A. A path to ground is not needed when using a positive source
B. The objects being charged must be conductors
C. The objects takes on the same charge as it's source
D. The source loses some of its charge
Answers
Answer:
C
Explanation:
because that's how science works
if a bus travel 200 km in 45 minutes calculate the speed in kilometre per minute
Answers
Answer:
multiply that and divided by 45
Answer:
4.444444444 km
Explanation:
200/45=4.444444444
The bus travels 4.444444444 kilometers in a minute
which of the following is the major mechanism of heat loss during exercise?
Answers
During exercise, the major mechanism of heat loss is evaporation of sweat from the skin. Sweat evaporation is a thermoregulatory process that allows humans to maintain a relatively constant internal body temperature when engaging in exercise.
As a result of exercise, metabolic heat is generated. When the internal temperature rises, thermoreceptors in the hypothalamus are activated, causing sweat glands to be stimulated through sympathetic nerve fibers.The sweat produced then evaporates off the skin and removes the heat generated by exercise, thus cooling the body. However, sweat evaporation is only effective in removing heat if the ambient temperature is lower than the skin temperature. If the ambient temperature is higher than the skin temperature, then sweat cannot evaporate, and heat will not be removed from the body. Other mechanisms of heat loss, such as conduction, convection, and radiation, are less important than sweat evaporation during exercise.
to know more about Sweat evaporation visit:
https://brainly.com/question/30465617
#SPJ11
When a parachutist opens her parachute after reaching terminal speed, in what direction does she accelerate?
Answers
When a parachutist opens her parachute after reaching terminal speed, she accelerates in the upward direction.
When a parachutist jumps out of an aircraft, she starts accelerating downwards due to the force of gravity. As she continues to fall, the air resistance acting on her increases, gradually reaching a point where it becomes equal to her weight. At this stage, she reaches terminal velocity, which is the maximum speed she can attain while falling.
Terminal velocity occurs when the force of gravity pulling her downwards is balanced by the air resistance pushing her upwards.
When the parachutist opens her parachute, it significantly increases the surface area in contact with the air. This sudden increase in surface area leads to a substantial increase in air resistance. As a result, the upward force exerted by the air resistance becomes greater than the downward force of gravity.
The net force acting on the parachutist changes direction and becomes upward, causing her to accelerate in the opposite direction.
By opening the parachute, the parachutist not only changes the direction of her acceleration but also reduces her speed. The increased air resistance slows her descent, allowing her to descend safely to the ground at a slower rate. The parachute provides a large amount of drag, which counteracts the force of gravity and allows for a controlled descent.
In summary, when a parachutist opens her parachute after reaching terminal speed, she accelerates in the upward direction due to the increased air resistance. This change in acceleration allows for a slower and safer descent to the ground.
Learn more about Terminal Speed
brainly.com/question/33442558
#SPJ11
a small car (mass 380. kg) is pushing a large truck (mass 900. kg) due east on a level road. the car exerts a horizontal force of 2345 n on the truck. if the truck is accelerating at 2.50 m/s2, what is the magnitude of the net force on the truck?
Answers
The magnitude of the net force on the truck is 2070.5 N.
What is frictional force?Frictional force is the force that opposes motion or attempted motion between two surfaces in contact. It arises as a result of the interlocking of irregularities on the surfaces in contact, and it acts in the direction opposite to the direction of motion or attempted motion.
Frictional force can be classified into two types: static friction and kinetic friction. Static friction is the force that prevents an object from moving when a force is applied to it, while kinetic friction is the force that opposes the motion of an object that is already in motion.
The normal force is equal to the weight of the truck, which can be calculated as:
weight = mass x gravity
where gravity is approximately 9.81 m/s^2.
So the weight of the truck is:
weight = 900 kg x 9.81 m/s^2 = 8829 N
Therefore, the normal force is:
normal force = weight = 8829 N
And the frictional force is:
frictional force = 0.5 x 8829 N = 4414.5 N
Next, we can find the net force on the truck by subtracting the force of friction from the force exerted by the car:
net force = 2345 N - 4414.5 N = -2070.5 N
Note that the negative sign indicates that the net force is in the opposite direction to the force exerted by the car, which makes sense since the truck is slowing down.
Finally, we can use Newton's second law to find the acceleration of the truck:
net force = mass x acceleration
-2070.5 N = 900 kg x acceleration
acceleration = -2.3 m/s^2
Again, the negative sign indicates that the truck is slowing down.
To know more about Frictional force, visit:
https://brainly.com/question/30280752
#SPJ1
The magnetic field lines due to a straight, current-carrying wire are __________.
Answers
The Magnetic field lines around a straight conductor carrying current are concentric circles whose centres lie on the wire.
I am having a bit of difficulty with this lab question:
_________________________________________
The passage of an occluded front may be accompanied by widespread precipitation and little temperature change at ground level. This is because occluded fronts are a combination of (1). [one / two / three] cold/cool air mass(es), which shifts a (2). [cold / warm / hot] air mass (3). [aloft / sideways / downwards].
_________________________________________
Currently, I have my answers as follows:
1. two cool/cold air masses
2. warm
3. downwards
Could someone help me out and let me know if I am correct? Thanks!
Answers
This is due to the fact that occluded fronts combine two cold air masses, which causes one of the cold air masses to go downward.
When a warm air mass is sandwiched between two cold air masses, an occluded front occurs. In an occlusion, the warm front passes over the cold front, which dives beneath it.
In a front is obscured, the warm front is fully supplanted by the cold front, in which the warm air masses have completely disappeared. Furthermore, there are frequent shifts in the various weather producing circumstances because of the cold front's relatively low temperature.
Learn more about occluded fronts, here:
https://brainly.com/question/11718564
#SPJ4
Which person has kinetic energy but does not have potential energy?
Answers
Answer:
a person walking on a flat side walk
Explanation:
hope this helped :)
A daredevil on a motorcyclo attempts to clear a 420-meter-wide river from a 210-meter-high cliff. What must his initial horizontal velocity
be?
Answers
Answer:
His initial velocity (speed) must be 64.16 m/s.
Explanation:
Horizontal Motion
When an object is horizontally launched at a speed v from a height h, the maximum horizontal distance (also called Range) traveled by the object can be calculated as follows:
\(\displaystyle d=v\cdot\sqrt{\frac {2h}{g}}\)
Our daredevil is attempting to clear a river d=420 m wide with his motorcycle from a cliff h=210 m high. We need to find the speed needed to safely reach the opposite edge of the river.
From the above equation, we solve for v:
Speed:
\(\displaystyle v=d\cdot\sqrt{\frac {g}{2h}}\)
\(\displaystyle v=420\cdot\sqrt{\frac {9.8}{2\cdot 210}}\)
\(\displaystyle v=420\cdot\sqrt{\frac {9.8}{420}}\)
v = 64.16 m/s
His initial velocity (speed) must be 64.16 m/s.
help i need an explanation
Answers
Answer:
125.44 N
Explanation:
From the question given above, the following data were obtained:
Weight on earth = 784 N
Acceleration due to gravity of the moon (gₘ) = 1.6 m/s²
Weight on moon =?
Next, we shall determine the mass of the person. This can be obtained as follow:
Weight on earth (Wₑ) = 784 N
Acceleration due to gravity of earth (gₑ) = 10 m/s²
Mass (m) =?
Wₑ = m × gₑ
784 = mass × 10
Divide both side by 10
Mass = 784 / 10
Mass = 78.4 Kg
Finally, we shall determine the weight of the person on moon. This can be obtained as follow:
Mass (m) = constant = 78.4 Kg
Acceleration due to gravity of the moon (gₘ) = 1.6 m/s²
Weight on moon (Wₘ) =?
Wₘ = m × gₘ
Wₘ = 78.4 × 1.6
Wₘ = 125.44 N
Therefore, the weight of the person on moon is 125.44 N.
a uniform ladder of mass m and length l rests against a smooth wall at an angle θ0, as shown in the figure. what is the torque due to the weight of the ladder about its base?
Answers
Therefore, the torque due to the weight of the ladder about its base can be calculated as: Torque = W * (l/2) = (m * g) * (l/2)
To calculate the torque due to the weight of the ladder about its base, we need to consider the force of gravity acting on the ladder. The torque is defined as the product of the force and the perpendicular distance from the pivot point (base) to the line of action of the force. In this case, the force of gravity acts at the center of mass of the ladder, which is located at the midpoint. Let's assume the distance from the base to the midpoint of the ladder is d. The weight of the ladder can be calculated as W = m * g, where m is the mass of the ladder and g is the acceleration due to gravity. The perpendicular distance from the base to the line of action of the force is l/2, as the center of mass of the ladder is at the midpoint.
Please note that the given angle θ0 is not used in the calculation of the torque. The torque is solely determined by the weight of the ladder and its length.
Learn more about torque due to the weight here:
https://brainly.com/question/30284986
#SPJ11
Why does calcium chloride have a greater affect on colligative properties verses sodium
chloride?
Answers
Answer:
Calcium chloride is very effective, working at temperatures below most products, and is significantly more effective than sodium chloride because of its ability to extract moisture from its surroundings and to cause exothermic or heat generating reactions.
Explanation:
Hope this helps
how is charged particles related to electric current, electric circuits, and resistance
Answers
Charged particles are fundamental to the behavior of electric currents, electric circuits, and resistance. An electric current is the flow of charged particles, typically electrons, through a conductor.
The flow of charged particles generates an electric field that induces a potential difference, or voltage, across the conductor.Electric circuits are constructed by connecting conductors and electrical components, such as resistors, capacitors, and inductors, in a specific configuration. The arrangement of the components determines how the current flows through the circuit.
The flow of current through the circuit depends on the resistance offered by the components in the circuit and the potential difference across the circuit.Resistance is the property of a conductor that opposes the flow of current. The resistance of a conductor is proportional to the number of charged particles in the conductor, the length of the conductor, and the cross-sectional area of the conductor. The resistance can also be affected by the temperature of the conductor and its material properties.
In summary, charged particles are responsible for generating electric currents that flow through electrical circuits. The behavior of the currents is determined by the arrangement of the components in the circuit and the resistance offered by the conductors and components. Resistance is a fundamental property of a conductor that opposes the flow of charged particles and can be affected by various factors.
For more such questions on resistance visit:
https://brainly.com/question/7669692
#SPJ11
2. True or False Every sample of a pure substance has exactly the same composition
and the same properties.
3. What are the two categories of pure substances?
a.
b.
شب نه ه ن
Name:
Answers
Answer:
the correct answer is False
Explanation:
i hope its right
exsessove exercise during early pregnancy may produce changes associated with
Answers
Excessive exercise during early pregnancy may produce changes associated with an increased risk of miscarriage or premature birth.
In the early stages of pregnancy, excessive exercise can have a negative effect on fetal growth. As a result, women who engage in regular strenuous exercise may have an increased risk of miscarriage or premature birth. In addition, excessive exercise can lead to a decreased blood supply to the uterus and placenta, which can also cause problems for the developing fetus.
A pregnant woman should be cautious about exercising too much, especially during the first trimester when the fetus is still developing. The amount of exercise that is safe during pregnancy varies depending on the individual and their level of fitness. It is always recommended that women consult with their healthcare provider before starting any exercise program during pregnancy.The effects of excessive exercise during early pregnancy include an increased risk of miscarriage or premature birth. This is because excessive exercise can cause a decrease in blood supply to the uterus and placenta, which can lead to problems with fetal growth. It is important for pregnant women to consult with their healthcare provider before engaging in any exercise program during pregnancy.
To learn more about pregnancy
https://brainly.com/question/32173645
#SPJ11